Cryoprecipitate is prepared by thawing frozen plasma slowly at a low temperature. A cryo bath holds water close to 4 °C and circulates it around the bags. It is a different machine from a 37 °C thawing bath. Always follow the method in your blood bank's procedures and standards.
Bioline India makes the BCB cryo bath in Indore. This guide lists what to check, using it as the example.
1. Temperature control near 4 °C
Holding a low temperature steadily needs both cooling and heating. Ask for the operating range and the display resolution. The BCB works between 3.7 °C and 4.3 °C, uses a compressor, a heater and a microprocessor controller, and displays temperature to 0.1 °C. Its controller can be set from 3 °C to 56 °C.
2. Capacity and time
Check how many bags fit in one cycle and how long a cycle takes. The BCB holds 12 fresh frozen plasma bags in a removable stainless steel tray of 4 x 3 separate compartments. One cycle takes about 2 hours for plasma bags stored at -40 °C.
3. Circulation
A high capacity pump keeps the water moving so every bag thaws evenly. The BCB has a filter at the water inlet to keep dust out of the pump.
4. Timer and alarms
The BCB has a timer from 0 to 4 hours and audible and visual alarms for high temperature, low temperature and the end of the timer.
5. Build and power
The BCB has a stainless steel inner tank and castor wheels, two of them lockable. It measures 850 x 475 x 795 mm, weighs about 80 kg, and runs on 230 V single phase with a power use of 1600 W. An external 2 kVA stabiliser is optional.
Quick checklist
- Holds a steady temperature near 4 °C
- Bags per cycle and time per cycle
- Strong, filtered water circulation
- Timer and temperature alarms
- Stainless steel tank, easy to move
- Power supply and local service
Ask us for a quote for the BCB cryo bath.
Pictures
