Bioline India

Radio frequency (RF) sealing

We design and build machines that seal PVC tubes, sheets and bags with radio frequency energy, for blood banks, pharma and industry.

What is RF sealing?

RF sealing joins two pieces of plastic using radio frequency energy, the same kind of energy that carries radio signals, but much stronger and kept inside the machine.

PVC reacts to this energy and warms up from inside. Pressed together while warm, two layers of PVC melt into one. There is no glue, no flame and no hot plate.

A PVC tube before sealingThe same PVC tube with RF seals

How it works, in four steps

  1. 1The PVC sits between two metal electrodesFor a tube, the electrodes are small jaws. For a sheet or bag, they are a die cut to the shape of the seal.
  2. 2The machine sends radio frequency energy across themA generator inside the sealer produces a very fast alternating field, millions of cycles every second.
  3. 3The PVC heats up from withinPVC molecules try to turn with the field and rub against each other, which makes heat inside the plastic.
  4. 4Pressure fuses it into oneThe jaws press the soft layers together. When the energy stops, the PVC cools and sets as one solid seal.

Why seal with radio frequency

Heat from inside
Radio frequency energy makes the PVC itself warm up. The electrodes stay cool, so nothing burns or sticks.
A seal as strong as the material
The two layers melt into one piece. The seal does not leak, peel or come apart.
Clean and fast
No glue, no flame and no smoke. A blood bag tube seals in about a second.
Closed system stays closed
Tubes are sealed without opening them, so what is inside stays sterile.

How we develop an RF sealer

Every field seals something different, so we develop each sealer around the job. Our R&D team designs the RF electronics, the electrodes and the controls in Indore.

  1. 01
    Understand the jobWe study the material, its thickness and shape, how many seals are needed in a day and where the machine will be used.
  2. 02
    Design the RF generatorWe design the electronics that make the radio frequency energy, sized to the material, so each seal gets the right amount of energy.
  3. 03
    Shape the electrodesWe make jaws for tubes, or dies in the exact shape of the seal for sheets and bags.
  4. 04
    Add control and safetyTimers, sensors and shielding keep every seal the same and keep the operator safe.
  5. 05
    Test, then buildWe test seal strength and leaks on your material, then move the sealer into production and service it ourselves.

Fields we develop for

  • Blood banksBlood bag tube sealers for the bench, the donor couch and donation camps, including portable sealers.See the product
  • Plasma and pharmaA multi segment sealer that seals and cuts up to 12 plasma bag tube segments at a time for fractionation lines.See the product
  • Medical disposablesSealing PVC tubing, sheets and bags while they are being made.
  • HospitalsTube and bag sealing at the point of care.See the product
  • Defence, space and nuclearCustom RF electronics built to the customer’s specification.
  • Research institutionsPrototype RF systems for laboratories.

Tell us your material, size and shape, and we will develop the sealer you need.

Share your requirement