A sterile connecting device, often called an SCD or a sterile tube welder, joins two pieces of PVC tubing without opening either of them to the air. Blood banks use it to add a bag, a filter or a sampling line to a blood bag set while keeping the system functionally closed.
Bioline India makes the BSCD Ultra in Indore. It is India's first sterile connecting device designed and made in India. This guide explains how these devices work and what to check before you buy one, using the BSCD Ultra's published specifications as the example.
How it works
The two tubes are placed side by side in the clamp. A heated wafer cuts through both tubes, the clamp moves the cut ends into line, and the hot ends melt together into one tube. The wafer is then removed and thrown away, so each connection uses a fresh wafer. Because the heat cuts and seals at the same moment, the inside of the tubing is not exposed.
Where blood banks use it
The BSCD Ultra is suitable for:
- Pooling blood components
- Leukoreduction, by connecting a leukocyte reduction filter
- Apheresis
- Quality control sampling
- Stem cell processing and cell washing
- Splitting a component into smaller portions
What to check before you buy
1. Tubing it can weld
An SCD welds only the tubing it is designed for. Check the tubing material and the outer and inner diameter against the blood bags, filters and kits you use. The BSCD Ultra welds PVC tubing with an outer diameter of 3.9 to 4.5 mm and an inner diameter of 2.9 to 3.1 mm. It works with blood bags, leukocyte reduction filters, apheresis kits and AVF needles.
2. Wafers and their supply
Every connection uses one wafer, so wafers are the main running cost. Ask what the wafers cost, how they are packed, and how quickly you can get more. The BSCD Ultra uses Bioline India's own wafers, packed in cassettes. It changes wafers automatically and drops used ones into a disposal box, so nobody touches a hot wafer.
3. Empty or filled tubes
Check whether the device can weld tubes that already hold blood or a solution. The BSCD Ultra connects two tubes whether they are empty or filled.
4. Ease of use
A clear display and few steps reduce mistakes. The BSCD Ultra connects two tubes in three steps, and its LCD shows the operating status, guidance for the operator and any error message. Detachable shelves hold the bags while you work.
5. Size, power and where it can stand
The BSCD Ultra measures 310 x 235 x 170 mm and weighs 6 kg. It runs on 100 to 240 V AC, 50/60 Hz, for indoor use between 10 and 40 °C.
6. Service, spares and training
An SCD is used in critical work, so ask who installs it, who trains your staff, and how fast an engineer and spare parts can reach you. With an imported device, also ask how long spares and wafers take to arrive and in which currency you will pay for them. A device made and serviced in India can shorten those waits. Bioline India installs and services the BSCD Ultra with its own engineers.
7. Registration and approvals
Check that the device is registered for use in your country, and use it only as its instructions describe. Ask the maker for copies of its licences.
Quick checklist
- Tubing material and diameter match your blood bags and kits
- Cost, packing and supply time of wafers
- Welds filled as well as empty tubes
- Clear display and few steps
- Size, weight and power supply suit your lab
- Installation, training, service engineers and spares near you
- Registration for your country and the maker's licences
BSCD Ultra at a glance
- Tubing: PVC, outer diameter 3.9 to 4.5 mm, inner diameter 2.9 to 3.1 mm
- Connection: automatic, in three steps, empty or filled tubes
- Wafers: Bioline India wafers in cassettes, changed and disposed of automatically
- Power: 100 to 240 V AC, 50/60 Hz
- Size and weight: 310 x 235 x 170 mm, 6 kg
- Noise: below 65 dBA
To see the BSCD Ultra, open its product page or ask us for a demonstration and a quote.
Pictures
