Bioline India

Blog

How to choose a blood bag tube sealer

A practical buying guide for blood banks: where the sealer will be used, tube size, sealing speed, battery backup, seal quality and service.

A blood bag tube sealer closes the PVC tube of a blood bag so that what is inside stays sealed off from the outside. Blood banks use it at the donor couch after collection, at donation camps, and in the component lab when tubes are sealed into segments. Because it is used on every unit, the right sealer saves time every day, and the wrong one slows the whole team down.

This guide lists the questions we suggest asking before you buy. It is written by Bioline India, which has made blood bag tube sealers in Indore since 2002, so where it helps, we use our own models as examples.

1. Where will you use it?

Start with the place, because it decides the type of sealer.

  • At the bench in the component lab: a benchtop sealer is steady and quick to use.
  • At the donor couch and at donation camps: a portable, battery powered hand sealer goes where the bag is.
  • In both places: a 2 in 1 sealer has a tabletop sealing head and a hand gun on one power unit.

For example, our Bio Seal H+ is a portable battery sealer that makes more than 1000 seals on a full charge, and our BioPowerSeal combines a tabletop sealer and a hand gun.

2. How does it seal?

Most blood bag tube sealers use radio frequency (RF) dielectric heating. The sealer passes radio frequency energy across the squeezed tube, the PVC warms up from inside, and the two walls fuse into one seal. Ask the maker which frequency and RF power the sealer uses, and whether RF is applied only after the tube is fully squeezed. Our sealers work at 40.63 MHz and apply RF only once the tube is squeezed.

3. Which tubes must it seal?

Check the tube material and outer diameter you use most.

  • Standard PVC blood bag tubes: check the diameter range. Our BBS2015 seals tubes of 4 to 6 mm, and the BioPowerSeal sealing head takes tubing of 2 to 6 mm.
  • Plasma tails kept frozen at minus 20 °C: these need a sealer built for them, such as our sealer for plasma tails at minus 20 °C.
  • Thermoplastic elastomer (TPE) tubing used in biopharmaceutical production: this needs a different kind of sealer, such as our TPE Tube Sealer.

4. How many seals a day?

Ask for the sealing time per tube and, for battery models, the number of seals per charge.

  • Our benchtop sealers seal a tube in about 1.5 seconds, and the BBS models let you set the sealing time between 0.5 and 3 seconds.
  • For plasma fractionation, a multi segment sealer saves the most time. Our Bio-MSTS Ultra seals and cuts up to 12 plasma tube segments in one cycle.

5. What happens when the power goes?

Power cuts should not stop a collection. Look for a sealer that switches to battery on its own. Our BBS2021 B and BBS2015B keep working on battery during a power failure and give about 500 seals on a full charge. The BioPowerSeal also changes over to battery automatically.

6. How good is the seal?

A good seal is wide, even and leak free, and it has a clean line to tear segments apart. Ask to see sample seals on your own tubes. Our sealers make a 2 mm wide seal with a clear rupture line.

7. Is it safe and easy to keep clean?

Check that the electrodes are covered, easy to clean, and protected against sparks and overheating. Simple lights or a display for Ready, Seal and battery status help new staff use it correctly.

8. Who will service it?

A sealer works hard, so service matters as much as the price. Ask who installs it, how fast an engineer can reach you, and how long spare parts take. Buying from the manufacturer usually means faster answers and genuine spares. Bioline India installs and services its own equipment with its own engineers.

Quick checklist

  • Benchtop, portable or 2 in 1, based on where you seal
  • RF frequency and power, and RF applied only after the tube is squeezed
  • Tube material and diameter range that match your bags
  • Sealing time, and seals per battery charge
  • Automatic change over to battery in a power cut
  • Seal width and a clean tear line, tested on your tubes
  • Covered, easy to clean electrodes and clear status lights
  • Installation, service engineers and spare parts near you

Bioline India tube sealers

  • BioPowerSeal: 2 in 1 tabletop and hand gun sealer, battery backed
  • Bio Seal H+: portable battery hand sealer, more than 1000 seals per charge
  • BBS2021 B and BBS2015B: benchtop sealers with battery backup
  • BBS2015: benchtop sealer for 4 to 6 mm tubes
  • Bio-MSTS Ultra: multi segment sealer, up to 12 plasma tube segments per cycle
  • TPE Tube Sealer: for thermoplastic elastomer tubing in biopharmaceutical production

See all of them on our products page, or ask us for a quote and we will help you choose.

Pictures

How to choose a blood bag tube sealer